BenV's notes


Lua 5.2.3 on Slackware64 14.1

by on Jul.04, 2014, under Software

Just ran into this one, noting it down for anyone else with this error:

Trying to compile Lua 5.2.3 (which should try to invest some in autoconf / cmake or something) gave me this lovely error:

make[2]: Entering directory `/usr/src/lua-5.2.3/src'
gcc -o lua lua.o liblua.a -lm -Wl,-E -ldl -lreadline
/usr/lib64/gcc/x86_64-slackware-linux/4.8.2/../../../../lib64/ undefined reference to `tputs'
echo Stom product, Makefile editen, dan make MYLIBS="-lncurses" anders breekt ie op readline.
/usr/lib64/gcc/x86_64-slackware-linux/4.8.2/../../../../lib64/ undefined reference to `tgoto'
/usr/lib64/gcc/x86_64-slackware-linux/4.8.2/../../../../lib64/ undefined reference to `tgetflag'
/usr/lib64/gcc/x86_64-slackware-linux/4.8.2/../../../../lib64/ undefined reference to `UP'
/usr/lib64/gcc/x86_64-slackware-linux/4.8.2/../../../../lib64/ undefined reference to `tgetent'
/usr/lib64/gcc/x86_64-slackware-linux/4.8.2/../../../../lib64/ undefined reference to `tgetnum'
/usr/lib64/gcc/x86_64-slackware-linux/4.8.2/../../../../lib64/ undefined reference to `PC'
/usr/lib64/gcc/x86_64-slackware-linux/4.8.2/../../../../lib64/ undefined reference to `tgetstr'
/usr/lib64/gcc/x86_64-slackware-linux/4.8.2/../../../../lib64/ undefined reference to `BC'
collect2: error: ld returned 1 exit status
make[2]: *** [lua] Error 1
make[2]: Leaving directory `/usr/src/lua-5.2.3/src'
make[1]: *** [linux] Error 2
make[1]: Leaving directory `/usr/src/lua-5.2.3/src'
make: *** [linux] Error 2

Reason: it needs to link against ncursus in Slackware (or alternatively libtermcap, but ncursus worked for me).
Solution – use make MYLIBS=”-lncursus”:

make MYLIBS="-lncurses"
cd src && make linux
make[1]: Entering directory `/usr/src/lua-5.2.3/src'
make all SYSCFLAGS="-DLUA_USE_LINUX" SYSLIBS="-Wl,-E -ldl -lreadline"
make[2]: Entering directory `/usr/src/lua-5.2.3/src'
gcc -o lua lua.o liblua.a -lm -Wl,-E -ldl -lreadline -lncurses
gcc -o luac luac.o liblua.a -lm -Wl,-E -ldl -lreadline -lncurses
make[2]: Leaving directory `/usr/src/lua-5.2.3/src'
make[1]: Leaving directory `/usr/src/lua-5.2.3/src'

Leave a Comment more...

Breaking slackpkg in unexpected ways

by on Jul.04, 2014, under Software

I just ran into something funny:

root@machine:~$ slackpkg update

Your slackpkg.conf is outdated. Please, edit it using
as example or overwrite it with

You can use 'slackpkg new-config' to do that.


Huh. I didn’t do anything weird with slackpkg….
Waaait a minute…

root@machine:~$ unset GREP_OPTIONS
root@machine:~$ slackpkg update
# Cut out the fetching of Changelog.txt
No changes in ChangeLog.txt between your last update and now.
Do you really want to download all other files (y/N)?

Apparently slackpkg breaks if you set GREP_OPTIONS to “–color=always”. Good to know for when I break it this way next time ๐Ÿ˜‰

Leave a Comment more...

Linux 3.13 released!

by on Jan.20, 2014, under Software

Yay, another new linux kernel. Of course this broke the closed NVidia driver, I tried 331.38:

[ 110.917769] nvidia: Unknown symbol acpi_os_wait_events_complete (err 0)

The fix for this is easy, unpack the installer and then patch file kernel/nv-acpi.c hack out line 306:


Run nvidia-installer and you should be good to go. Incredible that it always takes NVidia forever to fix these things, this bug has been known since at least 3.13-rc1. Oh well.

Next up, testing nftables. Looks like iptables will soon be obsolete ๐Ÿ™‚
Here’s a nice howto to get you started –
Might you be wondering (like me) where the heck the libnftables git repository went: they decided to rename the thing to libnftnl. You can find the repository here –

Another thing: compiling nftables from git breaks on my Slackware64-current machine atm because 1. still points to libnftables (instead of libnftl), I assume this will be fixed within the hour. 2: it tries to compile against libreadline without linking libncurses.
Fix for that is running configure like: LDFLAGS=-lncurses ./configure

Leave a Comment :, , more...

Steam on Linux in a slackware32 chroot and mono

by on Oct.03, 2013, under Software

So far I like what Valve has been doing with Steam on Linux. Obviously there’s always a lot to be improved, but they try and it works pretty well for me.
Since they don’t have a native 64 bit steam client yet and I don’t want to clobber my Slackware64 install with multilibs and other 32 bit garbage I still have my old 32 bit Slackware-current install mounted that I can chroot into and run 32 bit garbage.
Running steam for me looks a bit like:

benv@steammachine:~$ su -lc "chroot /slackware32"
Password: jemoeder
root@steammachine:~# su benv
benv@steammachine:~$ steam

A bit of a hassle but it works, and I need that 32 bit chroot for running windows garbage in wine32 anyway.

Lately I noticed a lot of games that have a linux version under Steam crashed. When running them a window pops up, disappears, and your last played date is set to “Today” in steam. Trying to run the game on the console shows something like this:

benv@steammachine:~/.local/share/Steam/SteamApps/common/Ittle Dew:0>./IttleDew.x86
Set current directory to /home/benv/.local/share/Steam/SteamApps/common/Ittle Dew
Found path: /home/benv/.local/share/Steam/SteamApps/common/Ittle Dew/IttleDew.x86
Mono path[0] = '/home/benv/.local/share/Steam/SteamApps/common/Ittle Dew/IttleDew_Data/Managed'
Mono path[1] = '/home/benv/.local/share/Steam/SteamApps/common/Ittle Dew/IttleDew_Data/Mono'
Mono config path = '/home/benv/.local/share/Steam/SteamApps/common/Ittle Dew/IttleDew_Data/Mono/etc'
Aborted (core dumped)

The reason was simple, but took me a lot of digging through strace etc to figure out. (gdb didn’t help since the included libmono that caused this segmentation fault was obviously stripped). At some point the program tries to read from /sys/devices/, which failed since I hadn’t bothered to mount /sys in my chroot. My mistake. (note that I did bother to mount /dev to get gamepad support etc).

Strace output:
[pid 16978] openat(AT_FDCWD, "/sys/devices/", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|O_CLOEXEC) = -1 ENOENT (No such file or directory)

Conclusion: make sure that Steam for Linux games have access to /sys/devices/ ๐Ÿ˜‰

Leave a Comment :, , , more...

Switching Windows 2008 Server from Intel to Intel

by on Aug.20, 2013, under Software

At work they’ve been busy changing the building a bit. In fact, lots of bits. This resulted in me having to indicate how and where they had to move the server rack to, and having to point out obvious facts such as that the cabling has to be redone.
So last week they moved the rack, fucked up the cabling and wondered why outgoing phonecalls didn’t work anymore (“because you put the line jack in the wrong port”) and why the printer didn’t work (“Because it doesn’t work on a telephone line, try connecting the network port next time”) etc.
Another casualty of this was the windows 2008 server. Scheduled to be replaced by a virtual machine soon(TM) along with the rest of the obsolete hardware in the rack, it decided it wouldn’t boot anymore after being shutdown. Fortunately giving it a new power supply helped it move along for another couple of days.
Today however, after another shutdown, it didn’t want to boot anymore again. Being sick of the old failing hardware I decided to move it temporarily to a new workstation for the CAD division until the new server is ready. The old hardware was a lousy Pentium 4 (3Ghz orso) with 8GB RAM, the temporary workstation is a HP Z420 with a quad core Xeon E5-1620 and 16GB of ECC. Quite an upgrade…. if only windows would agree.

The problem with changing hardware in windows is simple: It’ll BSOD on boot. Who cares about your business, you changed the hardware, so you’d better make some time to either reinstall windows (from backup if you’re lucky) or kick it hard enough to work on the new hardware. Microsoft has some details on fixing it here.
For me it fortunately would still boot in safe mode, where I could issue from an administrator command prompt:

BCDEDIT /set detecthal YES

After this it would reboot without a BSOD and I could get busy installing 23984732984723 drivers, obviously starting with an ethernet driver. (in 2013… still having to install ethernet drivers for run of the mill broadcom cards… pffrt.)
Oh well, at least I didn’t need a reinstall. YET.

Did I mention it wants to be reactivated? ๐Ÿ˜‰

Leave a Comment :, more...

MySQL^W MariaDB 5.5 on Slackware 11

by on May.10, 2013, under Software

One of my older (stable, works like a train) database servers still on Slackware 11 — well, heavily modified Slackware 11 ๐Ÿ˜‰ — is running MariaDB 5.1.something. Because I was tinkering with mysql settings I decided ‘hej, let’s see if upgrading to the latest version is a fun project!’.
Well, it sure is ๐Ÿ˜‰

First of all, the newer MySQL and therefore also MariaDB versions have dumped a perfectly fine autoconf system for Cancer Make aka CMake. Well, that’s just great. There’s no cmake in Slackware 11, so I figured to grab the latest slackware cmake sources and build it myself. No big deal, except in order to use the latest slackware sources you’ll need tar with xz support. Well, while we’re at it anyway might as well build them. So I headed over to the nearest slackware repository and built myself a new xz, tar, findutils and pkgtools using the slackware 14 build scripts (slightly helped/modified to handle the absense of xz in my old system). There, now back to cmake. (continue reading…)

Leave a Comment :, , , more...

Opera has cancer

by on May.08, 2013, under Morons, Software

If Opera continues living the way it does right now it’ll die within a few years. At least, that’s what I expect. Every new release there are more and more little nuisances. New features? Yeah, they have plenty of new garbage slowing the browser down.
Soon they’ll dump their rendering engine for Webkit. Who knows, it might even improve the browser, but then again… soon I might jump to Chrome or another piece of garbage.
I wonder why browser vendors have determined they all have to inject cancer into them. Must be contageous or something.

Anyhow, my Opera issue for today: Webfonts.
Ever seen a page rendered like this?

Opera with weird webfont

Opera with weird webfont

(continue reading…)

Leave a Comment :, , , more...

Apache 2.4 and PHP

by on May.01, 2013, under Software

Those of you running Slackware 14 or current probably have noticed the move to the Apache httpd v2.4 already.
On my webservers I haven’t yet dared to upgrade from the stable 2.2 version, but I figured it might be a good time to test out an upgrade procedure.

Notable problems / changes

This new version of the Apache httpd brings a few things that you should really pay attention to before attempting to upgrade. Well, you could ignore it, but it would surprise me if you wouldn’t end up with a broken webserver ๐Ÿ˜‰
So you might want to look into these things:

  1. Configuration syntax changes
  2. Handling the Pleuris-Hoeren-Paaltjes aka PHP disaster
  3. Switching to the MPM-event module

Of course you’ve already done your homework and read upgrading to 2.4 from 2.2, right? ๐Ÿ˜‰ (continue reading…)

Leave a Comment :, , , , , , more...

Android screenshots

by on Mar.01, 2013, under Software

Just for fun I’m coding a bit for Android these days. No fancy setup so far, I’m using eclipse under my 32 bit Slackware chroot. (64 bit eclipse is no problem, but those failures at Google haven’t had the decency yet to bring out their SDK for 64 bit. They simply say “Oh you want 64 bit? No problem, just make sure your 64 bit linux version is capable of running 32 bits libraries”).

Anyhow, setting up that stuff is easy enough. What I couldn’t figure out for a while was how to make a screenshot of my running program. I guess you can blame eclipse (or google’s eclipse plugin) for not having this option builtin, because it is certainly possible. Here’s how:
1. In the android-sdk-linux dir (that you got from unzipping/untarring the google android sdk that you -should- be able to download from the link above, but somehow I can’t get their download button to work in Opera 12.14 atm) there’s a tools dir, which has a (deprecated: ddms) ‘monitor‘ tool. Start it:

benv@32bitchroot:~$ cd android-sdk-linux/tools
benv@32bitchroot:~/android-sdk-linux/tools$ ./monitor

2. You should get a list of devices on the left. Select your device, and click the screen capture button.

Android Device Monitor -- making a screenshot

Android Device Monitor — making a screenshot

3. Hit save and you can write it to a file ๐Ÿ™‚

Unfortunately I haven’t been able to figure out a way to do this without starting all that graphical garbage yet. If any of you know how to do that so I can attach a shortcut to it in my fluxbox, that would be great. Maybe Google can take a hint? :-p

Oh yeah, here’s a screenshot to show you guys it worked ๐Ÿ˜‰

Screenshot of Android Device

Screenshot of Android Device

Leave a Comment :, more...

Linux 3.8 and NVIDIA driver

by on Feb.21, 2013, under Software

Good news everyone! Linux 3.8 has been released! Obviously I immediately fired up my compiled to upgrade from the by now ancient 3.6.8 kernel that I was running.
After rebooting my Slackware64 machine into the new kernel without a problem it was time to recompile the NVIDIA binary blob. You know, this piece of garbage. It doesn’t matter if you pick the latest official release version (seems to be 310.32 atm) or the beta that I picked, it won’t compile.
Running the installer will fail and leave you a /var/log/nvidia-installer.log that contains something like this:

root@machine:/# tail /var/log/nvidia-installer.log
/tmp/selfgz7139/NVIDIA-Linux-x86_64-313.18/kernel/nv.c: In function โ€˜nv_kern_openโ€™:
/tmp/selfgz7139/NVIDIA-Linux-x86_64-313.18/kernel/nv.c:1521:30: warning: passing argument 2 of โ€˜request_irqโ€™ from incompatible pointer type [enabled by default]
In file included from /tmp/selfgz7139/NVIDIA-Linux-x86_64-313.18/kernel/nv-linux.h:128:0,
from /tmp/selfgz7139/NVIDIA-Linux-x86_64-313.18/kernel/nv.c:13:
include/linux/interrupt.h:130:1: note: expected โ€˜irq_handler_tโ€™ but argument is of type โ€˜enum irqreturn_t (*)(int, void *, struct pt_regs *)โ€™
/tmp/selfgz7139/NVIDIA-Linux-x86_64-313.18/kernel/nv.c:1525:17: error: implicit declaration of function โ€˜NV_TASKQUEUE_INITโ€™ [-Werror=implicit-function-declaration]
/tmp/selfgz7139/NVIDIA-Linux-x86_64-313.18/kernel/nv.c:1537:25: warning: passing argument 2 of โ€˜request_irqโ€™ from incompatible pointer type [enabled by default]
In file included from /tmp/selfgz7139/NVIDIA-Linux-x86_64-313.18/kernel/nv-linux.h:128:0,
from /tmp/selfgz7139/NVIDIA-Linux-x86_64-313.18/kernel/nv.c:13:
include/linux/interrupt.h:130:1: note: expected โ€˜irq_handler_tโ€™ but argument is of type โ€˜enum irqreturn_t (*)(int, void *, struct pt_regs *)โ€™
cc1: some warnings being treated as errors
make[3]: *** [/tmp/selfgz7139/NVIDIA-Linux-x86_64-313.18/kernel/nv.o] Error 1
make[2]: *** [_module_/tmp/selfgz7139/NVIDIA-Linux-x86_64-313.18/kernel] Error 2
nvidia.ko failed to build!
make[1]: *** [module] Error 1
make: *** [module] Error 2
-> Error.
ERROR: Unable to build the NVIDIA kernel module.

Fortunately here’s a little patch you can run to fix it. This assumes you have your linux 3.8 kernel sources symlinked in /usr/src/linux!

root@machine:/usr/src# wget -q
root@machine:/usr/src# bash -x
root@machine:/usr/src# cd NVIDIA-Linux-x86_64-313.18
root@machine:/usr/src/NVIDIA-Linux-x86_64-313.18# wget -q
root@machine:/usr/src/NVIDIA-Linux-x86_64-313.18# patch -p1 < nvidia-313.18-linux-3.8.patch root@machine:/usr/src/NVIDIA-Linux-x86_64-313.18# ./nvidia-installer # now it should work

Works for me at least ๐Ÿ˜‰

Leave a Comment :, , more...


  • 2018 (1)
  • 2016 (1)
  • 2015 (7)
  • 2014 (4)
  • 2013 (11)
  • 2012 (27)
  • 2011 (26)
  • 2010 (25)
  • 2009 (68)